Fire Protection

Il sistema OLIflex Fire Protection è stato studiato per contribuire a debellare l’annoso problema dell’incendio dei

tetti e solai in materiale combustibile che provoca ogni anno gravissimi danni a case e persone. Certificato in

laboratorio secondo gli standard della norma europea EN 1856-1, sia con temperatura costante a 700°C, sia a

1000°C per 30 minuti, può essere installato a diretto contatto con solai e tetti in legno e materiale combustibile.

Adatto per pacchetti isolanti con spessori fino a 200 mm di contatto diretto e ventilato. Il sistema di attraversamento

tetto/solaio va sempre abbinato ad un elemento lineare OLIflex D.P. inox 25.

The OLIflex Fire Protection system was created to meet the needs of green building, efficiency and energy saving,

in response to the increasingly frequent use of thick insulating materials, both in walls but above all in roofs and

attics. Certificate in the laboratory according to the standards of the European standard EN 1856-1, both with

a constant temperature of 700°C and at 1000°C for 30 minutes, it can be installed in direct contact with attics

and roofs made of wood and combustible material. Suitable for insulation packages up to 200mm thick in direct,

ventilated contact. The roof/attic crossing system must always be combined with an OLIflex D.P. inox 25 linear

element.

T600

G00

1000°C

UNI EN

1859

200 mm

PELLET

RAL

Documentazione online

Documentation online

www.oli-world.com

181

F

i

r

e

p

r

o

t

e

c

t

i

o

n